Bid Description |
- 1. Technical Specification of WLAN (Wireless Local Area Network)
№
|
Item Detail Minimal Technical Specification
|
Unit
|
Qty
|
Remark
|
|
Layer 2 and 3, 24 x 100M/1G/2.5G/5G/10G Base-T Ethernet ports, 4 x 25 GE SFP28 + 2 x 100 GE QSFP28, POE ++
v Performance: -
- Switching capacity : 2.4 Tbit/s, Forwarding rate: 490 mpps, MAC Address Table Size:- 32K entries Remote Management Protocol:- SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, Encryption Algorithm:- SSL, Authentication Method :- Secure .RADIUS and TACACS+, SNMPv3 crypto, SSH, SSL and SCP, 802.1x, 802.1x Accounting / MIB, 802.1x w/ port security , 802.1x w/Voice VLAN, 802.1x Guest VLAN, 802.1x VLAN assignment, 802.1x MAC-Auth Bypass, BPDU/Root Guard, Port Security, Private VALN Edge, Storm Control, Block unknown unicast and multicast, IGMP Snooping, IGMP Filter/Throttle.
v Features: -
- Layer 2 switching, auto-sensing per device, dynamic IP address assignment, auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, IPv6 support, Quality of Service (QoS), Port Security, , Compliant Standards: - IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w,
- Status Indicators: - Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, UPOE and link speed
v Expansion / Connectivity Interfaces: -
- 1 x USB - Type B፣ 1 x console - mini-USB Type B – management, 1 x console - RJ-45 – management, Expansion Slots:-One extended slot, supports 2 x 25 GE SFP28 or 8 x 10 GE SFP+, 8 x 25 GE SFP28 cards
- Power Device: - Internal power supply, Voltage Required: - AC 120/230 V ( 50/60 Hz ), Power Consumption Operational:- 55 Watt
v Power supply:
- Chassis with dual redundant power supplies and built-In fan
v Included:
- Console Cable 6 ft with USB Type A and mini-B
- 3 x 10G transceiver module , 1310, SMF, G.652, 10km
- 1 x power supply
v Warranty: 2 years
v Including cable connecter, installation, configuration, and Testing
|
pcs
|
40
|
|
-
|
Layer 2 and 3, 48*100M/1G/2.5G/5G/10G Ethernet ports, 4*25GE SFP28, 2*100GE QSFP28 ports, PoE++, 1*1000W AC power/equivalents
Feature and Description
Switching capacity: >= 2.4 Tbit/s
Packet forwarding rate: >=490 mpps
MAC address table :-MAC address learning and aging
Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses Interface-based MAC learning limiting, 32K MAC address entries
VLAN :-4094 VLANs, Guest VLAN and voice VLAN.,GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and interfaces1:1 and N:1 VLAN mapping
Integrated WAC : Management of up to 1024 APs
IPv4 routing :-Static route, RIP, RIPng
Multicast :-IGMPv1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicastInterface-based multicast traffic statistics
Reliability: -RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP,ERPS (G.8032) , STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) BPDU protection, root protection, and loop protection BPDU tunnel
Security: -Hierarchical user management and password protection. DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface number, and VLAN ID Port isolation, port security, and sticky MAC
MFF, Black hole MAC address entries Limit on the number of learned MAC addresses
IEEE 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH V2.0, Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and white list
Access Security: -DHCP relay, DHCP server, DHCP snooping, and DHCP security
Super Virtual Fabric (SVF):-Working as the parent node to vertically virtualize downlink switches as one device for management supports two-layer clients architecture. Support as a client node to be managed by SVF parent
Management and maintenance: - iStack
Virtual Cable Test (VCT), Remote configuration and maintenance using Telnet
SNMP v1/v2c/v3, RMON, eSight and web-based NMS, HTTPS, LLDP/LLDP-MED
System logs and multi-level alarms, 802.3az IEEE Dying Gasp (excluding battery LAN switches)
Input voltage: -AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
Warranty: 2 years
Additional accessories: -
- 4 x Optical module transceivers, SFP+, 10G, LC single-mode module (1310 nm, 10 km, LC)
- 1 x power supply
- 1 x Console Cable 6ft with USB Type A and mini-B
Supplied all required Accessories, Installation materials, Installation, configuration, Commissioning, integration and testing done by bid winner
|
pcs
|
10
|
|
-
|
Outdoor Wi-Fi Access Point POE Omnidirectional
- Smart External Antenna
- 2.4 GHZ 10dBi antenna gain
- 5 GHZ 11dBi antenna gain
- Peak Transmit Power (Tx port/chain + Combining gain): ·
- 2.4GHz: 29dBm
- 5GHz: 29dBm
- Wi-Fi Standards · IEEE 802.11a/b/g/n/ac/ax
- 2.4GHz (8x8)+5GHz (8x8), dual radios mode: 2.4GHz (4x4)+5GHz (12x12), dual radios: 2.4GHz (4x4)+5GHz (8x8)+ independent radio scanning mode*. The three modes can be flexibly switched. The maximum rate is up to 1.15 Gbps at 2.4GHz band, 9.6 Gbps at 5GHz band, and 10.75 Gbps for the device.
- Supports long-distance coverage mode: 2.4GHz (8x8)+5GHz (8x8), triple radios mode: 2.4GHz (4x4)+5GHz (4x4)+5GHz (4x4), dual radios 2.4GHz (4x4)+5GHz (4x4)+ independent radio scanning mode*. The three modes can be flexibly switched. The maximum rate is up to 1.15 Gbps at 2.4GHz band, 9.6 Gbps at 5GHz band, and 10.75 Gbps for the device.
- 1 x 10 GE electrical, 1 x GE electrical and 1 x 10 GE SFP+.
- 6 KA/6 KV surge protection for Ethernet ports, IP68 waterproof and dustproof design, and –40°C to +65°C wide temperature, fully meeting industrial-grade requirements.
- UL/DL MU-MIMO on both the 2.4 GHz and 5 GHz frequency bands
- UL/DL OFDMA scheduling
- The AP provides 160 MHz bandwidth, signifying many more available data subcarriers and extending the signal transmission channel.
- The AP provides both 10GE port and 10GE SPF+ uplink ports
WIFI future
- Compliance with IEEE 802.11ax and compatibility with IEEE 802.11a/b/g/n/ac/ac Wave 2
- Maximum rate of up to 10.75 Gbps
- Maximum ratio combining (MRC)
- Space time block code (STBC)
- Cyclic Delay Diversity (CDD)/Cyclic Shift Diversity (CSD)
- Beamforming
- DL/UL MU-MIMO
- DL/UL OFDMA
- Compliance with 1024-QAM and compatibility with 256-QAM/64-QAM/16-QAM/8-QAM/QPSK/BPSK
- Target wake time (TWT)*
- Low-density parity-check (LDPC)
- Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
- 802.11 dynamic frequency selection (DFS)
- Short guard interval (GI) in 20 MHz, 40 MHz, 80 MHz, and 160 MHz modes
- Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement priority-based data processing and forwarding. Automatic and manual rate adjustment (the rate is adjusted automatically by default)
Network features
- Compliance with IEEE 802.3ab
- Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
- Compliance with IEEE 802.1q
- SSID-based VLAN assignment
- VLAN trunk on uplink Ethernet ports
- Management channel of the AP uplink port in tagged and untagged mode
- DHCP client, obtaining IP addresses through DHCP
- Tunnel data forwarding and direct data forwarding
- Application identification and QoS classification when AP local forwarding (also called direct forwarding), which can significantly improve voice quality for applications such as Skype, QQ, and WeChat
- STA isolation in the same VLAN
- IPv4/IPv6 Access control lists (ACLs)
- Link Layer Discovery Protocol (LLDP)
- Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
- Unified authentication on the AC in Fit AP mode
Security features
- pen system authentication
- WEP authentication/encryption using a 64-bit, 128-bit, 152-bit or 192-bit* encryption key
- WPA2-PSK authentication and encryption (WPA2 personal edition)
- WPA2-802.1X authentication and encryption (WPA2 enterprise edition)
- WPA3-SAE authentication and encryption (WPA3 personal edition)
- WPA3-802.1X authentication and encryption (WPA3 enterprise edition)
- WPA-WPA2 hybrid authentication
- WPA2-WPA3 hybrid authentication
- Dynamic PSK
- WPA2-PPSK authentication and encryption in Fit AP mode
- Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, and STA/AP blacklist and whitelist
- 802.1x authentication, MAC address authentication, and Portal authentication
- DHCP snooping
- Dynamic ARP Inspection (DAI)
- IP Source Guard (IPSG)
- 802.11w Protected Management Frames (PMFs)
Certifications and Compliance:
Wi-Fi Alliance*:
- Wi-Fi CERTIFIED™ a, b, g, n, ac · Wi-Fi CERTIFIED™ 6 · Wi-Fi Enhanced Open™ · WPA2™ - Personal · WPA2™ - Enterprise · WPA3™ - Personal · WPA3™ - Enterprise
Warranty: 2 years
Includes:
- Outdoor mounting bracket (weatherized aluminum), 180-degree adjustment range in both azimuth and elevation. Mounting support for solid wall or ceiling, vertical or horizontal pole 1” to 4” in diameter using enclosed mounting hardware
- POE Injector
- 1x 10GBASE-LR, SFP+ optic (LC), for up to 10km over SMF
- All accessories, installation, Configuration, Commissioning, and Test must be done by the bidder
|
Pcs
|
100
|
|
-
|
Indoor Wi-Fi Access Point
Indoor 802.11ax 4x4:4
ü Wi-Fi Standards · IEEE 802.11a/b/g/n/ac Wave 2/ax
v Supported Rates:
- 802.11ax: 4 to 2400 Mbps
- 802.11ac: 6.5 to 1,733Mbps (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
- 802.11n: 6.5 Mbps to 600Mbps (MCS0 to MCS31)
- 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
- 802.11b: 11, 5.5, 2 and 1 Mbps
v Supported Channels
- 2.4GHz: 1-13
- 5GHz: 36-64, 100-144, 149-165
v MIMO:
- 2.4 GHz: 2x2:2; 5 GHz: 4x4:4
ü Channelization: 20, 40, 80, 160MHz
v Security:
- WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, AES, 802.11i, Dynamic PSK, OWE
- WIPS/WIDS
v Antenna Type:
ü Antenna Gain (max): · Up to 3dBi
ü Peak Transmit Power (Tx port/chain + Combining gain): ·
- 2.4GHz: 29dBm
- 5GHz: 28dBm
ü IOT module: Built-in IoT slots, supporting Zigbee/RFID/Thread
v Frequency Bands:
- ISM (2.4-2.484GHz)
- U-NII-1 (5.15-5.25GHz)
- U-NII-2A (5.25-5.35GHz)
- U-NII-2C(5.47-5.725GHz)
- U-NII-3 (5.725-5.85GHz)
v Performance and capacity:
ü Peak PHY Rates:
- 2.4 GHz: 574Mbps
- 5 GHz: 4.8Gbps
v Networking:
ü VLAN:
- 802.1Q (1 per BSSID or dynamic per user based on RADIUS) · VLAN Pooling · Port-based 802.1x
- Authenticator & Supplicant
ü Tunnel
v Physical interfaces:
ü Ethernet ports:
- One 5Gbps Ethernet port and one 1Gbps Ethernet port
- LLDP
ü USB: 1 USB 2.0 port, Type A
ü Operating Temperature: · -10°C (-14°F) to 50°C (122°F)
ü Operating Humidity: · Up to 95%, non-condensing
v Power Consumption:
ü AC Power:
- 33.5W when PoH/UPoE, Injector, 48VDC
- 25.5W when 802.3at POE+
- 12.95W when 802.3af POE
v Certifications and Compliance:
ü Wi-Fi Alliance*:
- Wi-Fi CERTIFIED™ a, b, g, n, ac ,ax
v Warranty: 2 years
v Includes:
- Wall or poles mount, acoustic ceiling, and Secure bracket
- POE Injector (60W) for each device
- All accessories, installation, Configuration, Commissioning and, Test must be done by the bidder
|
Pcs
|
300
|
|
-
|
WLAN Access Controller Card
Features
- Description: WLAN Access Controller AP Resource License-512AP (with the X-series LPU used) supported by the S12700 series
- Product Family: Switch
- Sub Product Family: Campus Switch
- Product Series: S12700
- Maximum Number of Managed Aps: 512
- AP-AC Networking: Layer 2 or Layer 3 networking
- Forwarding Modes: Direct forwarding of tunnel forwarding
- Route: Support static routing, RIP-1/RIP-2, OSPF, BGP, IS-IS, Policy-based routing, Routing policy
- Radio Protocols: 802.11 a/b/g/n/ac/ac wave 2/ax
- Support: Three years Manufacturer Support and Service
- Others: Providing all necessary types and quantity of connectors, cabling, documentation, user and administrator manuals and others accessories necessary for the implementation
- Warranty: 2 years
- All accessories, installation , Configuration , Commissioning and Test must be done by bidder
|
Pcs
|
1
|
|
-
|
10GE Datacenter Switch
- Switching capacity: 2 Tbit/s
- Interface: 48 x 10 GE SFP+, 6 x 40/100 GE QSFP28
- Layer3 features:
ü Should support IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP.
ü Should support IPv6 dynamic routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+.
ü Should support IP packet fragmentation and reassembly
ü Should support access, trunk, and hybrid modes.
ü Should support M-LAG technology, QinQ, Mux VLAN;
ü Supports VRRP, VRRP load balancing, and BFD for VRRP.
ü Supports hardware-based BFD
ü Supports N:1 virtualization technology
ü Should support VXLAN and BGP EVPN.
ü Should support micro segmentation isolation
ü Should support IGMP snooping and IGMP proxy
ü Should support NSH
- Warranty: 2 years
- Support:
ü Three years Manufacturer Support and Service
- All accessories, installation, Configuration, Commissioning and, Test must be done by the bidder
|
Pcs
|
2
|
|
-
|
Organization Extended validation (EV) SSL Certificate: Multi-Domain – Pack of 5 domains (with pooling 5 years’ subscription)
Technical specification
ü Secure up to 250 hostnames on a single SSL certificate
ü High 256-bit encryption
ü Full business validation
ü FREE lifetime, self-service reissues
ü Includes a True Site identity assurance Smart Seal – embedded organization name /date/time stamp
ü Compatible with 99%+ current browsers
ü Present in 99%+ of mobile devices and smartphones
ü Installation Support Available
ü Unlimited Server Licenses at no extra cost + Secure www & non-www domains
ü 5 Years comprehensive OEM support/maintenance from the date of issuance of certificate (24 x 7 x 365)
ü All accessories, installation , Configuration , Commissioning and Test must be done by bidder
|
Set
|
1
|
|
-
|
1KW Solar power supply system
System Basic Information
- Solar panel rated output power: 1050W
- Suitable for daily power consumption: >6300WH
- Allowable max loads power: 1KW(=1.4KVA)
Solar panel (QTY: 3pcs)
- 350W mono solar panel
- Vmp: 38.39V
- Voc:47.13V
- Imp: 9.25A
- Size: 1956*992*40mm
- 25 years’ life time
- Coated steel Glass: 3.2mm Tempered
- Terminal block: IP65 with MC4 connector
PV combiner (QTY: 1pc)
- Simplify wiring between PV array and controller.
- Prevent hot spot effect, thunderstorm & surge protection
Hybrid solar Inverter (QTY: 1pc)
- Solar inverter with controller built it
- Inverter power: SC1kw/24v
- LCD display inverter and controller info
- Built-in AC charger (public network)
- MPPT controller: 30A/24V, AC charge: 10-15A
- Output:110V, 220VAC and 5V/12VDC
Gel Battery (QTY: 2pcs)
- Capacity: 12V/200AH full sealed Solar power gel battery,
- Service life: 6-8 years
- Size: 483*170*219mm
panel rack (QTY: 1set)
- Slope Rooftop or Flat rooftop
- wind load: 55m/s Snow load:1.5kn/m2
- structure: Anodized Aluminum + stainless steel, Angle adjustable (other type of rack can be customized as per client's requirement)
Cables (QTY: 1set)
- 16mm2*35CM battery cable 1pcs
- 16mm2*1M battery cable 2pcs
- 4mm2 PV each cable black and red length 50M
- terminals and MC4
Service box (main breaker panel 1 set) includes:
- Rated Miniature Circuit Breaker
- Rated Residual Current Circuit Breaker
- Rated Earth Leakage Circuit Breaker etc.….
Warranty: 2 years
Other
- Box: - Waterproof stainless steel mounted on the switch/rack
- Inverter, charge controller and battery puts in the box
- Cables, bolts and all installation accessories with each switch/rack site construction accessories
- Including cable connecter, cable Installation and Testing
- All Access point Integration
- All switch Integration
- Single phase AC power system Integration
- All accessories, installation , Configuration , Commissioning and Test must be done by bidder
|
Pcs
|
20
|
|
-
|
3KW Solar power supply system
v System Basic Information
- Solar panel rated output power: 3000W
- Suitable for daily power consumption: >12KWH
- Allowable max loads power: 3KW
v Solar panel (QTY:10pcs)
- 330W mono solar panel
- Vmp:37.57V
- Voc:46.34V
- Imp 8.78A
- Size : 1956*992*40mm
- Coated steel Glass:3.2mm Tem pered
- Terminal block: IP65 with MC4 connector
- Efficiency performance :25 years 80 % 20 year 85% 10 years 90%
- Connect way: each 2 pcs in series
v PV combiner (QTY:1pc)
- Multiple PV strings inputs.
- Simplify wiring between PV array and controller. protections to controller thunderstorm & surge protection
v Hybrid solar Inverter (QTY:1pc)
- Inverter power: SC3kw/48V
- MPPT Controller model: 48v/60A
- Charging efficiency; 90%-95%,
- LCD display inverter and controller info
- Built-in AC charger (public network)
- Output:110v, 120v, 220v, 230v, 240v(optional)
- Product size: 480*270*185mm
v Gel Battery (QTY:4pcs)
- Capacity: 12V/200AH full sealed Solar power gel battery,
- Service life:6-8 years,
- Size: 522*240*219mm
- Connect way: 4pcs battery in series is each string. 2 string connect to solar hybrid inverter
v panel rack(QTY:1set)
- Slope Rooftop or Flat rooftop wind load: 55m/s
- Snow load:1.5kn/m2
- structure: Anodized Aluminum+stainless steel, Angle adjustable (other type of rack can be customized as per client's requirement)
v Cables (QTY: 1set)
- 16mm2*35CM battery cable 6pcs
- 16mm2*1M battery cable 4pcs
- 4mm2 PV cable 100M
- terminals and MC4
v Service box (main breaker panel 1 set) includes:
- Rated Miniature Circuit Breaker
- Rated Residual Current Circuit Breaker
- Rated Earth Leakage Circuit Breaker etc.….
v Warranty: 2 years
v Other
- Box: - Waterproof stainless steel mounted on the switch/rack
- Inverter, charge controller and battery puts in the box
- Cables, bolts, and all installation accessories with each switch/rack site construction accessories
- Including cable connecter, cable Installation and Testing
- All Access point Integration
- All switch Integration
- Single-phase AC power system Integration
ü All accessories, installation, Configuration, Commissioning and Test must be done by bidder
|
Set
|
25
|
|
10.
|
5KW solar power supply system with full accessories
ü Load boost function makes it easier to run any kind of motor loads like water pump, fridge
ü Save 45%energy at max under the built-in ECO Mode (30% on average)
ü Generator power assist function enables small generator to handle big loads
ü Remote monitoring and control
ü Compatible with the most moulids lithium battery
ü Compatible with poor generators
ü Live data and status overview
ü System configuration and parameter setting, updating
ü Daily logging with history record for production, consumption and storage
ü Social effect analysis, load management, battery SOH evaluation.
ü Solar panel: Mono 350W
ü Vmp:38.39V, Voc:47.13V, Imp 9.25A
ü 25 years’ life time
ü Coated steel Glass:3.2mm Tem peered
ü Terminal block: IP65 with MC4 connector
ü Efficiency performance :25 years 80 % 20 year 85% 10 years 90%
ü 96v Multiple PV strings inputs.
ü Simplify wiring between PV array and controller. protections to controller
ü Wide range of DC input voltage
ü Reliable thunderstorm& surge protection
- Hybrid solar Inverter (1Pcs)
ü Inverter power: 5kw/96v
ü MPPT Controller: 96v/60A
ü Charging efficiency; 90%-95%,
ü LCD display inverter and controller info
ü Built-in AC charger (public network)
ü Output:110v,120v,220v,230v,240v(optional)
ü Capacity:12V/200AH full sealed Solar power gel battery,
ü Service life:6-8 years ,
ü Connect way: 8pcs battery in series is each string. 2 string connect to solar hybrid inverter
ü Slope Rooftop or Flat rooftop wind load:55m/s,
ü Snow load:1.5kn/m2
ü Structure: Anodized Aluminum +stainless steel, Angle adjustable
ü Battery cable, PV cable, terminals and MC4, connectors and other installation accessories
- Service box (main breaker panel 1 set) includes:
ü Rated Miniature Circuit Breaker
ü Rated Residual Current Circuit Breaker
ü Rated Earth Leakage Circuit Breaker etc.….
- Warranty: 2 years
- Others
- Box: - Waterproof stainless steel mounted on the switch/rack
- Inverter, charge controller and battery puts in the box
- Cables, bolts and all installation accessories with each switch/rack site construction accessories
- Including cable connecter, cable Installation and Testing
- Supplied all required Accessories, Installation materials, Installation, configuration, Commissioning, integration and testing done by bid winner
|
Set
|
6
|
|
11.
|
10KW Off grid solar power supply system with full accessories
Key Features
- Load boost function make it easier to run any kinds of motor loads like water pump, fridge
- Save 45%energy at max under the built-in ECO Mode (30% on average)
- Generator power assist function enables small generator to handle big loads
- Remote monitoring and control
- Compatible with the most moulids lithium battery
- Compatible with poor generators
- Live data and status overview
- System configuration and parameter setting, updating
- Daily logging with history record for production, consumption and storage
- Social effect analysis, load management, battery SOH evaluation.
Solar panel (40Pcs)
- Solar panel: Mono 350W
- Vmp:38.39V, Voc:47.13V, Imp 9.25A
- 25 years’ life time
- Coated steel Glass:3.2mm Tem peered
- Terminal block: IP65 with MC4 connector
- Efficiency performance :25 years 80 % 20 year 85% 10 years 90%
PV Array Combiner (1Pcs)
- 96v Multiple PV strings inputs.
- Simplify wiring between PV array and controller. protections to controller
- Wide range of DC input voltage
- Reliable thunderstorm& surge protection
Hybrid solar Inverter (1Pcs)
- Inverter power: 10kw/96v
- MPPT Controller: 96v/100A
- Charging efficiency; 90%-95%,
- LCD display inverter and controller info
- Built-in AC charger (public network)
- Output:110v,120v,220v,230v,240v(optional)
Gel Battery(32Pcs)
- Capacity:12V/200AH full sealed Solar power gel battery,
- Service life:6-8 years,
- Connect way: 8pcs battery in series is each string. 4 string connect to solar hybrid inverter
Panel rack(1Set)
- Slope Rooftop or Flat rooftop wind load:55m/s,
- Snow load:1.5kn/m2
- Structure: Anodized Aluminum +stainless steel, Angle adjustable
Service box (main breaker panel 1 set) includes:
- Rated Miniature Circuit Breaker
- Rated Residual Current Circuit Breaker
- Rated Earth Leakage Circuit Breaker etc.….
Warranty: 2 years
Cables(1Set)
- Battery cable, PV cable, terminals and MC4, connectors and other installation accessories
Others
- Box: - Waterproof stainless steel mounted on the switch/rack
- Inverter, charge controller and battery puts in the box
- Cables, bolts and all installation accessories with each switch/rack site construction accessories
- Including cable connecter, cable Installation and Testing
- Solar system technician training for 15 staff with certifications
ü Installation of photovoltaic solar systems: This training provides the basics of electricity, to describe the main components of a PV system and their operation, as well as their methods of connection, and finally to discuss the rules and safety equipment related to a photovoltaic system. The training covers the Direct current, PV panels, gel Batteries, Panel-Batteries links, Charge regulator, Inverter, Safety etc.…
ü Maintenance of photovoltaic solar systems: This training is designed to provide technicians with the skills to put into service, troubleshoot, identify or prevent failures and propose solutions for an autonomous solar system. The themes covered in training are Maintenance, Isolated site installations, Preventive maintenance, Commissioning, Curative maintenance etc.…
- Supplied all required Accessories, Installation materials, Installation, configuration, Commissioning, integration and testing done by bid winner
|
Set
|
5
|
|
12.
|
250kva 3 Phase Automatic Voltage Regulator
ü Phase: Three Phase
ü Current Type: AC
ü Type: AVR
ü Capacity: 250KVA
ü Output voltage: 380V
ü Frequency: 50/60HZ
ü Display: LCD display
ü Protection: Short Circuit, over-voltage, under voltage
ü Switch: 3P400A(Chnit brand switch)
ü Phase: Three Phase
ü Voltage: 415V±20%
ü Frequency: 50/60HZ
ü Phase: Three Phase
ü Voltage: 380V
ü Frequency: 50/60HZ
ü Rated output current: 380A
ü Voltage Accuracy: ±1-5%V Adjustable (Factory set±1%)
ü Load working: continuous working keeps 80% load
ü Efficiency: >98%
ü Insulation strength: 2500V/Min
ü Insulation Class: H class
ü Cooling method: Natural cooling/ Fan system cooling
ü Resist electric strength: 2500VAC/min
ü Noise: ≤60db (include forced air-cooling system)
ü Temperature Rise: ≤75℃
ü Size: Length1200 *Width 700* High1500(mm)
ü Weight: Net weight:800KG Gross weight: 850KG
- Warranty: 2 years
- Protection Function
ü Over/under voltage protection: When the input voltage exceeds the value of over/under voltage, the stabilizer will protect automatically
ü Over current: When the current exceeds the rated value, automatically cut off the input
ü Overload and short circuit protection: When the load exceed the overload value or short circuit of the equipment, it can cut off the power supply within the specified time;
ü Position Limitation Protection: When the brush is running over the area, automatically stop adjustment;
ü Bypass Protection: When the voltage stabilizer needs maintenance or in failure, the switch can be switched manually in the power supply;
ü Effective sampling circuit control: High accuracy, good sensitivity, frequency characteristic measurement, good rate, high input impedance, low output impedance, wide range and low power consumption power supply
ü Circuit Function: When the sampling voltage is lower than the lower reference voltage or higher than the upper limit voltage, the brush will automatically return to the center;
- Supplied all required Accessories, Installation materials, Installation, configuration, Commissioning, integration and testing done by bid winner
|
Set
|
1
|
|
13.
|
Optical Time Domain Reflect meter (OTDR)
ü Houses any of renowned OTDR configurations
ü Touch screen and short key functionality
ü Improved productivity
ü Fiber inspection probe
ü Optical power meter and VFL
ü Macro bend finder
ü Linear trace view
ü Lightweight
ü Fast and powerful
ü Flexible connectivity
ü Built for the outside plant
ü Intel ATOM processor with Windows Embedded Standard for maximized productivity and unique versatility
ü Flexible connectivity with USB, mobile, Wi-Fi and Bluetooth capabilities
ü Compatible with 11 families of modules for multiple field-testing applications
Specifications
ü Touchscreen, color, 640 x 480 TFT 163 mm (6.5 in)
ü Three USB 2.0 ports
ü RJ-45 LAN 10/100/1000 Mbit/s
ü Fiber inspection probe connector port (video) Built-in Bluetooth and Wi-Fi (hardware)
ü 8 GB internal memory (flash)
ü 16 GB USB stick (optional)
ü Rechargeable Li-Ion batteries 8 hours of operation as per Telcordia (Bellcore) GR-196
ü AC/DC adapter, input 100-240 VAC, 50-60 Hz, 2 A max, output: 24 VDC, 90 W
ü Intel ATOM processor Windows Embedded Standard
ü Temperature operating: –5 oC to 50 oC (23 oF to 122 oF)
ü Storage: –40 oC to 70 oC (–40 oF to 158 oF)
ü Relative humidity: 0 % to 95 % non-condensing
ü Size (H x W x D): 322 mm x 197 mm x 109 mm (12 11/16 in x 7 ¾ in x 4 5/16 in)
ü Weight: 2.1 kg (4.6 lb)
ü Vibration: <1.5 g at 10 Hz to 500 Hz (on three main axes)
ü Mechanical shock: <760 mm on six sides and eight main edges (compliant to GR-196-CORE)
- Built-In Power Meter Specifications
ü Calibrated wavelengths (nm): 850, 1300, 1310, 1490, 1550, 1625, 1650
ü Optional CWDM calibrated wavelengths (nm): 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625
ü Power range (dBm):
ü 26 to —64 (GeX)
ü Uncertainty (%):
- ±5 % ± 3 pW (InGaAs)
- ±5 % ± 0.4 nW (GeX)
ü Display resolution (dB):
- InGaAs: 0.01 = max to —76 dBm, 0.1 = —76 dBm to —86 dBm, 1 = —86 dBm to min
- GeX : 0.01 = max to —54 dBm, 0.1 = —54 dBm to —64 dBm, 1 = —64 dBm to min
ü Automatic offset nulling range:
- Max power to —63 dBm for InGaAs
- Max power to —40 dBm for GeX
ü Tone detection (Hz): 270/1000/2000
- Warranty: 2 years
- Accessories
ü FP4S:400x Fiber Inspection Probe
ü FP4D:200x/400x Fiber Inspection Probe
ü GP-10-070: Rigid FTB-200 carrying case
ü GP-10-072: Semi-rigid FTB-200 carrying case
ü GP-302: USB mouse
ü GP-1002: Headset
ü GP-1008: VFL adapter (2.5 mm to 1.25 mm)
ü GP-2001: USB keyboard
ü GP-2016: 10 feet RJ-45 LAN cable
ü GP-2028: Computer security cable kit
ü GP-2116: Single-slot storage module
ü GP-2137: USB-to-RS-232 converter
ü GP-2138: DC car adapter/inverter
ü GP-2144: USB 16G micro-drive
- Training
- Full training for 10 ICT staff with certifications
- Supplied all required Accessories, Installation, configuration, Commissioning, integration and testing done by bid winner
|
Pcs
|
01
|
|
14.
|
1 Meter Single-mode Duplex Fiber Optic Cable (9/125) - LC to LC - Yellow
|
pcs
|
50
|
|
15.
|
3 Meter multi-mode Duplex Fiber Optic Cable (9/125) - LC to LC - Yellow
|
pcs
|
20
|
|
16.
|
50 Meter Single-mode Duplex Fiber Optic Cable (9/125) - LC to LC - Yellow
|
pcs
|
20
|
|
17.
|
100 Meter Single-mode Duplex Fiber Optic Cable (9/125) - LC to LC - Yellow
|
pcs
|
20
|
|
18.
|
2 Core Single Mode Flat Fiber Optic Drop Cable
Single Mode fiber optic patch cables come with a 9-micron diameter glass core. With the cladding layer, they are 125 microns, and with the buffer layer they are 250 microns.
Specifications:
- Indoor/Outdoor Cable
- Diameter: 3mm
- 2*0.45mm steel strength member
- 2 Fiber Cores
- G.657A2, 2.0×3.0mmmm
- LSZH (Low Smoke, Zero Halogen)
- UV resistant
- Supplied all required Accessories, Installation, Configuration, Commissioning, integration, and testing done by bid winner
|
Meter
|
2000
|
|
19.
|
Single mode fiber optics cable 12 cores for each 12U Rack requiring buildings /equivalents
Cable Type: Loose Tube, Environment: Outdoor
Fiber Category: Single-mode (OS2), Flame Rating: Riser (OFNR), Product Type: Dielectric, Fiber Coloring: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua, Fiber Count (cable): 12, Fibers per Tube: 12
Number of Active Tubes: 1, Number of Ripcords: 1, Number of Tube Positions: 1, Outer Jacket Color: Black, Outer Jacket Material: Flame-Retardant, UV-Resistant, Tensile Strength Elements and/or Armoring - Layer 1: Dielectric strength members
***Outside Building Use inside PVC conduit of 50-60mm diameter and fiber protective cover, under Ground B/n 40-meter gab Use Manhole in bricks and with concrete base internally of 80x80x80cm 10cm thick mass concrete Base and reinforced concrete cover with handle,
**Including Fiber splicing, Terminating, punching cable connecter, cable Installation, and Testing
|
Meter
|
10,000
|
|
20.
|
Fiber Optic, Splice Closure, Dome, H-Series
Fiber Optic Dome Splice Closures are specially designed to provide reliable and long-lasting protection for optical fibers and splices, combined with maximum ease of installation and maintenance.
Features
- Complete range for all types of applications, wavelengths (1260-1630nm) and cables
- Robust, chemical resistant body, ribbed for additional mechanical strength
- Highly efficient fiber management system with splice cassettes for single and ribbon fiber cables
- Craft friendly for ease of use and maintenance
- Easy to open and re-enter for maintenance and cable repair
- Integrated seal air tight and water proof RoHS compliant
Technical data
- SM Type Closure:
- Dimensions: Height = 299mm Æ 178mm
- Weight: 1.74 Kgs
- Capacity (single fiber): 6-48 fibers
- No. of cable ports: 1 x oval and 3 x round ports
- Cable diameter: 5mm – 25mm
- Sealing method: Heat-shrinkable sealing
- Capacity: 4 x 12 fiber splice cassettes
|
Pcs
|
15
|
|
21.
|
HUAWEI USG6615E Data Center Firewall License
- Description: IPS Update Service Subscribe 10 years
- Attributes: Self-developed software
- Category: Software
- Product Line: Networking
- Product Family: Security
- Overview: License
- Sub Product Family: Network Security
- Product Series: USG6600
- URL Remote Query
- Anti-Virus Update
- Supplied all required Accessories, Installation, configuration, Commissioning, integration and testing done by bid winner
|
Patch
|
2
|
|
22.
|
Network technician tool kit
A full tool including and safety materials Europe latest and quality standard requiring tools included aluminum largest tool Box) describe detail and each tools bellow
Glove, eyeglass. Miter saws, Plastic hammer, Crimper Frame, ratcheting type, Crimp Die, RG58,59/62, Crimp Die, RG 8/11, Extension Blade, 4", ESD Wrist strap, Full set of pliers Flashlight, Mini-Mag AA, Handle, for blades, 4" Nut driver Blade, 3/16"", Nutdriver Blade, 1/4" Nutdriver Blade, 5/16", Folding Hex Set,.050"-5/32", 8 pc, Gender Changer, M/M DB-25 Gender Changer, F/F DB-25, Knife, lightweight Parts Box, Pin Extraction Tool, RS-232 Plier, Semi-Flush Cutter, 4", Plier, Long Nose, w/ cutter, 6", Plier, Chain Nose, 5" Plier, Vise Grip, long nose, 6", Probe, nylon push/pull Receptacle Analyzer, w/ ESD plug, Solder,Pocket Pack, 10'x.031dia., Soldering Iron, 60 Watt ,, Soder-Wick, #3 Scissors, Electrician's Magnetic type Screwdriver, Phillips, #0 x 2" Magnetic type Screwdriver, Phillips, #1 x 3" Magnetic type Screwdriver, Phillips, #2 x 4" Magnetic type Screwdriver, Slotted, 1/8"x 6" Magnetic type Screwdriver, Slotted, 3/32"x 2" Magnetic type Screwdriver, Slotted, 5/16"x 6" Magnetic type Screwdriver, Torx, T8 Magnetic type Screwdriver, Torx, T10 Magnetic type Screwdriver, Torx, T15 Magnetic type Screw holder, double ended nylon Stripper, Thicket Coax, Stripper, thin net Coax Telephone Line Tester, Tone Tester, Wire stripper, 26-16 AWG Wrench, adjustable, 6", Fiber Stripper, Cable Stripper, 1liter Bottle 95% Alcohol ,
|
Set
|
15
|
|
23.
|
AC Power Supply for Huawei aggregation switch model S6720-54C-EI-48S-AC
ü Battery MODEL: PAC-600WA-B (600 W AC Power Module)
|
PCS
|
12
|
|
24.
|
AC Power Supply for Cisco Catalyst WS-C3750X-48P-S
ü Battery MODEL: C3KX-PWR-350WAC
|
Pcs
|
5
|
|
25.
|
HPE ProLiant G9 DL580 Hard disc
ü (2TB x15) hot-plug dual-port SAS hard disk drive – 7200 RPM, 6Gb/s transfer rate, 2.5-inch SFF, MDL SmartDrive Carrier (SC) Bytes/Sector 512, Operating Temperature 50° to 95° F (10° to 35°C)
ü part number: 652749-B21/653954-001
|
Pcs
|
15
|
|
26.
|
HPE ProLiant G9 DL580 CPU(Processor) Processor Kit
Specifications:
ü HP Intel® Xeon® E74809v3 DL580 G9
ü Category: ProLiant Processor
ü Sub-Category: Intel Xeon
ü Generation: G9
ü Part Number: 788331-B21
ü Products ID: 479961
ü Product Type: Processor Kit
ü Processor Type: Intel Xeon
ü Processor Core: Octa-Core
ü Processor Qty: 1
ü Clock Speed: 2.0GHz
ü Quick Path Interconnect: 6.40GT/s
ü L2 Cache: 2MB
ü L3 Cache: 20MB
ü 64-bit Processing: Yes
ü Process Technology: 22nm
ü Processor Socket: Socket R LGA-2011
ü Thermal Design Power: 115W
|
Pcs
|
6
|
|
27.
|
HP 1200W Common Slot Platinum Plus Hot-Plug Power Supply Kit
ü Category: ProLiant Option
ü Sub-Category: ProLiant Power Supply
ü Generation: 1200 Watt
ü Part Number: 748287-B21
ü Products ID: 482027
ü Model: 748287-B21
ü Device Type: Power Supply
ü Wattage:1200W
ü Input Voltage: 110-220 V AC
ü Hot Pluggable: Yes
ü Fan: Internal
|
Pcs
|
6
|
|
28.
|
HPE ProLiant G9 DL580 RAM
ü Storage Capacity: 1x 16GB
ü Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory/RAM Kit
ü Part Number: 726719-B21
|
Pcs
|
4
|
|
29.
|
Dell PowerEdge r930 Hard disc
ü Category: Dell Hard Drive
ü Sub-Category: 7.2K
ü Generation: SAS 2 SFF
ü Part Number: 16MGW
ü Products ID: 491288
ü Capacity: 2TB
ü Interface: Serial Attached SCSI (SAS 2)
ü Enclosure: Internal
ü Drive Dimensions: 2.5 inches x 1/3H (SFF)
ü Spindle Speed: 7200RPM
ü External Data Transfer Rate: 12G = 12Gb/sec
ü Seek Time: 4.5ms
ü Hot Swap: Yes
ü Manufacturer: Dell
ü Pre-Failure Warranty: Yes
ü Hot Swap Tray: Included/Attached
|
Pcs
|
20
|
|
30.
|
Dell PowerEdge r930 RAM
ü Category: Dell Memory
ü Sub-Category: PowerEdge
ü Generation: 2400 MHz
ü Part Number: A8711887
ü Products ID: 483851
ü Manufacturer: Dell
ü Product Type: Memory Module
ü Storage Capacity: 16GB
ü Memory Technology: DDR4 SDRAM
ü Memory Type: DEPENDENT ON PROCESSOR TYPE
ü Number of Modules: 1 x 16GB
ü Memory Speed: 2400MHz
ü Form Factor: 288-Pin DIMM
ü Signal Processing: Registered
ü Rank: Dual Rank 2Rx8
ü CAS: CL15
ü Voltage: 1.2V
|
Pcs
|
8
|
|
31.
|
Dell PowerEdge r930 Processor
ü Part Number: T55KM
ü Compatibility: DELL POWEREDGE R930
ü Socket Type: FCLGA2011-3
ü Processor Type: INTEL XEON E7-4800V3 / E7-4800V4 / E7-8800V3 / E7-8800V4 FAMILY
|
Pcs
|
2
|
|
13. Lot 3: Project Delivery Period
Thus, vendors are advised to come up with at most possible effective and short project period to deliver the services. Bidders are required to provide their most feasible project plan at most high task breakdown clarity that could show: supply of goods and installation services and overall total period within 90 working days
14. Instruction for bid
- All bidders should fill their offer against the given mandatory (M) specification only. If a column is not filled or filled with inappropriate data, it results in automatic rejection.
- Bidders must include all accessories and civil work items for the full functioning of the system in their financial proposal.
- Bidders must attach bill of quantity without price in the technical document failing to do so might lead to complete rejection from the bid.
- Datasheet for major items and items that require datasheet must be included in the technical document failing to do so might lead to complete rejection from the bid.
- Manufacturer authorization form must be attached for major items failing to do so might lead to complete rejection from the bid.
- Better product and Option from Participant will be highly considered.
- Products should meet the minimum specification mentioned above and better products and specifications gets higher points, and the evaluation will be done accordingly.
- Bidders for the sub systems, lots, or slices of the overall system will not be accepted.
- Bidders who score less than 70% of the Technical Evaluation will not be considered for further financial evaluations.
10. If bidders assume that a given specification is not clear or not appropriate, they can give their comment on the remarks column and give the appropriate specification.
11. The bidders can visit the site before submittal for further clarification.
15.Lot 3 : Evaluation and qualification criteria
Technical evaluation shall be guided by the under listed criteria. Bidder requires baseline technical score of 70% in order to be considered for financial evaluation.
No.
|
Technical Evaluation Criteria for Qualification
|
Points
|
Remark
|
A
|
Vendor Qualification
|
10%
|
|
1
|
Bidder’s Relevant Years of Experience:
- At least Two/Three project experience and show cases of the company in similar size and complexity of Indoor/Outdoor Wireless LAN infrastructure: (Above 2 solution = 4 for 2 project 3 and 1 project =1 mark )
- Experience of Wired and Wireless LAN Solution implementation
- showcase of enterprise Wired and Wireless LAN LAN implementation
- Company profile: number of years the vendor has been in Information Technology. (>=5/7 year =2 and Bellow 5 years=1)
- Certificate of successful Project completion (>=2 solution =2 for 1 project 1 and 0 project =0 mark )
- Certification and award for related technology (partnership with technology vender) (>=2 Certify and Award =2, for 1 Certify and Award 1 and 0 A Certify and Award =0 mark )
Important Note:
- Bidders attach must be certificate of successful WLAN Project completion
|
4
2
2
2
|
|
B
|
Team Qualifications (To be deployed in this project)
|
30%
|
|
1
|
Project Team Organization Structure
- Team structure and Responsibility matrix (It should clearly show who is responsible for what.) (full qualify = 5, above Half qualify =2.5, bellow half qualify =1, 0 qualify=0 marks)
- The project management team comprises project manager, technical engineers and Wireless LAN certified staffs participating in the project and their position. (full qualify = 5, above Half qualify =2.5, bellow half qualify =1, 0 qualify=0 marks )
Important Note:
- Bidders attach must be relevant certificates of technical experts
|
5
5
|
|
2
|
Project Manager: Highly skilled in project management and exper
|
Mode of procurement |
NCB
|
Bid Closing Date |
17/05/2022 |
Bid Closing Time |
2:00 PM |
Expected Award Date | 17/05/2022 |
Extended To |
|
Reason for extension |
|
|