Technical Specifications
|
|
|
Item No
|
Equipment’s
|
Technical Specifications and Standards /TS/
|
Qty
|
1
|
Fume Hood or Chemical Hood
|
External Size (W*D*H) (mm)
|
1200/1500/1800x880x2350mm(47''/59''/71''x35''x93'')
|
1
|
Internal Size (W*D*H) (mm)
|
950/1250/1550x700x1150mm(37''/49''/61''x28''x45''')
|
Exhaust air volume
|
700-1300m³/h
|
900-1700m³/h
|
1300-2100m³/h
|
Work Surface Height
|
850 mm (33'')
|
Air Velocity
|
0.3 -- 0.6 m/s
|
Noise
|
≤65dB(A)
|
Sash
|
6mm temper glass
|
Power Supply
|
AC110/ 220V, 50/60Hz(optional)
|
|
Body
|
1.2mm cold-rolled steel
|
|
Inner liner Panel
|
Compact board
|
Material
|
Countertop
|
12.7mm Phenolic resin/ 16mm Epoxy resin
|
|
Switch for fan and lamp
|
|
LED lamp
|
2
|
Aflatoxin and Fumonisins ELISA Kits
|
Aflatoxin B1 (2) and Total Fumonisin (2) ELISA kits. R-Biopharm Brand
|
4
|
3
|
Hot plate with Magnetic Stirrer
|
The stirrer reversed automatically every 7.5 seconds or can run in one direction only,
|
4
|
Speed is variable up to 2200 rpm and it will stir up to 4 liters depending on the viscosity of the solution,
|
Heat is continuously variable up to a maximum of 3200c,
|
The hot plate is 133 mm I diameter, dimension 203 X 190 X 150 mm,
|
Power supply for 220 – 240 V, 50 HZ;
|
4
|
Insect Olfactometer
|
4 choice, transparent thicker Plexiglas and Teflon material, forming a sealing performance, designed to study insect olfactory odor, diameter 150mm or 300mm, channel 4, drying tower 500ml 4 pcs, pear-shaped glass bottle: 25ml, 50ml, 100ml, each 4 pcs, glass specifically sub-flow meter: 4 pcs, medical silicone tube: 4pcs
|
1
|
5
|
Laminar flow cabinet
|
• Dimensions (h x d x w) mm - 1268 X 664 X 1274 mm
|
1
|
• Maximum air velocity - 0.45 m/sec
|
• Pre-filter - 95 % efficient at microns
|
• HEPA filter - 99.997 % efficient at 0.3 microns
|
• Fan - double inlet, centrifugal, super silent
|
• Spare parts
|
• Pre-filter
|
• Heap filter
|
Fan assembly
|
6
|
Insect Growth Chamber
|
2-door insect rearing champer, wire shelves (3 per door), PVC coated, Temp range: 5 deg c to 70 deg C, temp control: +_0.1 deg C, Temp sensor: 3-wire RTD, Humidity range: 20 to 98% RH, Humidity control: +_2%RH, top mounted, thermoelectric cooling system, LED interior lighting
|
1
|
7
|
Deep Freezer (-80°C)
|
Vertical, Capacity-950L,
|
3
|
Temp. range – -50 to -86°C, Storage capacity- 740 L (26.1 ft³)
|
No. of compartments – 3 to 5
|
8
|
Centrifuge with Temp. controller
|
Benchtop, Refrigerated,
|
1
|
Capacity- 24 x 1.5/ 2.0 ml tubes, Speed- 100 - 15000 rpm,
|
Max. RCF - 21,130 × g
|
Temp. control range – ( -10 to +40°C)
|
Timer - 30 s to 9:59 h
|
9
|
Dry Heat Bath with Cooling
|
Should suitable for both 1.5 and 0.5 ml eppendorf tube,
|
1
|
Temp range – (+5 °C to 100°C)
|
Timing Range - 1min~99h59min
|
10
|
Lyphilizer (Freeze Dryer)
|
Benchtop Freeze Dryer
|
3
|
FreeZone 6.0 L -105C Freeze Dryer_
|
Lyophilizer for moderate sample lyophilizing
|
Collector Temperature: -105° C, -157° F
|
Ice Holding Capacity: 6.0L
|
11
|
Plant Growth Chamber
|
Vertical, Capacity – 450 L
|
1
|
Temperature Range (°C) - Light at 10 ~ 65 °c/no light at 0 ~ 60 °C
|
Humidity Range (°C) –
|
Light Off up to 90% RH at ± 3% RH
|
Light On up to 80% RH at ± 3% RH
|
ILLUMINANCE (LX)- 0 ~ 15000(adjustable in five levels)
|
Timing range- 0 ~ 99 hours, or 0 ~ 9999 minutes, optional
|
Shelves: 3 Pcs/adjustable
|
Profile size (mm) - 1828 × 783 × 905
|
Tank size (mm) - 1148 × 554 × 610
|
12
|
Vortex
|
Shaking Speed: 0-3000rpm
|
1
|
Should be compatible for test tube and Eppendorf tube.
|
13
|
Mini centrifuge
|
"Three in one" composite rotor, suitable for
|
1
|
6x1.5/2.0mlcentrifuge tube
|
6x0.5ml centrifuge tube
|
2x8x0.2mlPCR tube strips
|
16x0.2ml centrifuge tube
|
Speed:
|
4000rpm/6000rpm/7000rp
|
14
|
SDS gel Unit (small size)
|
Applications:
|
1
|
For SDS-PAGE, Protein Electrophoresis.
|
Size (L X W X H):150x100x140 (mm)
|
Gel dimension (L X W):83x75 (mm)
|
Full buffer volume: about 400ml
|
Running buffer volume: about 170 ml;
|
Runs up to 10 or 15 samples;
|
Comb thickness: 1.0 and 1.5 (mm) (standard configuration),0.75 (mm) (optional configuration);
|
15
|
Western blot Electrophoresis Tank for protein transfer to PVDF membrane. Should compatible to SDS gel Unit
|
SDS-PAGE Gel Electrophoresis Tank Analytical Apparatus SDS PAGE Protein Transfer
|
1
|
Should compatible to SDS gel Unit
|
Double plate, used with electrophoresis apparatus.
|
Spec of Gel Plate: 83X75mm
|
16
|
Analytical Balance
|
Capacity-300 g
|
4
|
Certifications/Compliance-CE, CAN/CSA
|
Includes-Stainless steel pan, draft shield
|
· Length (Metric)-317 mm
|
· Weight (Metric)-7 kg
|
· Connection Type-RS232
|
· Display Type-LCD
|
· Readability-0.0001 g
|
· Material- ABS, Stainless Steel Pan
|
· Stabilization Time-4 sec.
|
· Electrical Requirements-120 V
|
· Height (Metric)-303 mm
|
· Width (Metric)-201 mm
|
17
|
Laboratory Water Distiller
|
· Water Output: 4 litres per hr, single distilled
|
2
|
· Wate output pH: 5.0 - 6.5
|
· Water Conductivity, uScm-1 3.0 - 4.0
|
· Resistivity, mOhm-cm: 0.25 - 0.3
|
· Temperature: 25 - 35 Deg C
|
· Input Water supply: 1 litre per min, 3
|
· Electricity supply: 220 or 240V, 50-60Hz, single phase
|
· Power requirement: 3kW
|
· Dimensions, (w x d x h): 500 x 150 x 450mm
|
18
|
Digital Microscope
|
· Objective Lenses: Infinity corrected N-Achroplan 10x, 40x, 100x oil objectives.
|
1
|
· Viewing Head: Ergonomic trinocular head 5-30º/23 (100:0/0:100), upright image.
|
Mode of procurement |
NCB
|
Bid Closing Date |
16/05/2022 |
Bid Closing Time |
2:15 PM |
Expected Award Date | 16/05/2022 |
Extended To |
|
Reason for extension |
|